Re: help : i need upgrade CPU ( Hp Compaq dc7100 SFF )
Hi: The processor yu want to buy for your dc7100 SFF will absolutely not work. Below is the link to the quickspecs for your model. See page 5 for the list of supported processors. Only the Pentium 4...
View ArticleRe: HP EliteDesk 800 NIC issue - 100mb/FULL not working
Anytime you post a question, it is very helpful to get as much details as possible. For example, you are not stating which OS you are having problems with. You also do not mention if this is at the OS...
View ArticleRe: SED encryption of Samsung SSD 840 EVO on HP8300
Although HP can not support any drives not tested and qualified by HP, the drives might/should work with Drivelock. Drivelock manages the SED password automatically when enabled - BIOS admin password...
View ArticleRe: HP EliteDesk 800 NIC issue - 100mb/FULL not working
Hi Dan,We have updated the latest drivers from Intel and HP for the BIOS and the NIC, to no avail.We are running W7 Pro x64, and this si setting the link speed in the OS (through device manager or the...
View ArticleGPU for ProDesk 400 Microtower
Hello Everyone!!! Are dual slot GPU's fit for Prodesk 400 Microtowers?I know that HP has GPU options with slim form factor and normal (single slot) form factor,but many times the dual slot GPU's have a...
View ArticlePro 3005 MT CoProcessor Driver for Win7 - 64bit
Kinda says it all. I have a HP Pro 3005 MT desktop with an AMD X2 245 processor, that I've upgraded to Windows 7 Ultimate (64 bit). Everything is working fine with the exception that the driver for a...
View Articlebios changing
Have an envy 700-210xt & have xfered the win 8.1 to my ssd drive. Have the bios boot check disabled. However i have a dificult time keeping the bios from changing. Have the boot order setup with my...
View ArticleTrying to upgrade dx2400 machines to Windows 7
Hi -- I just spent a half hour uselessly going around in circles with a Vijay Somethingorother in an online chat. This is NOT that difficult a question ... I have a collection of dx2400 machines. These...
View ArticlePower-On Password Options for HP Elite 8300
When I enable Power-On Password in the BIOS, I fail to see an option to ignore the Power-On Password on warm boots. So currently when the Power-On Password option is enabled, and I simply restart the...
View ArticleRe: Flickering monitor
hello, try replacing video cable, if doesnt work , replace the monitor.
View ArticleRe: HP PRO 3520. How to configure a new hard drive?
hi, you just need Windows DVd TO INSTALL Windows, and should configure your hard drive by itself
View ArticleRe: New Compaq 6305 Microtower - want to switch to RAID mode
Did you ever get this installed?The W7 Pro Recovery disks provided do not seem to work for this application.I am waiting on a solution from HP support, but thought I would ask if you had success. If...
View ArticleRe: HP EliteDesk 800 NIC issue - 100mb/FULL not working
hi, please chhange the settings on your network card, speed link speed to 100mb full duplex, click apply and ok, restart the machine.
View ArticleRe: HP EliteDesk 800 NIC issue - 100mb/FULL not working
Hi, We have tried this, but still no luck, Have tried turning off the etherent power saving features, jumbo packets etc, no luck. I've logged with HP anyway. Looking aroung, Dell have the issue too...
View ArticleRe: bios changing
Ted - the Envy 700 is a product covered in our Consumer Support Forum, and you'll be much more likely to receive assistance if you check with the users @...
View ArticleRe: HP EliteDesk 800 NIC issue - 100mb/FULL not working
hi,, try this driver, restart the machine, after that change the speed....
View ArticleNeed CPU Upgrade advice for my HP DC5750 sff
I'm going to upgrade my graphics but before that I want upgrade my CPU. Here are my specs: http://valid.canardpc.com/k32slr If there is anything else I shoul upgrade for my sytem please input.
View ArticleRe: HP EliteDesk 800 NIC issue - 100mb/FULL not working
We found a solution to our issue with the i217-lm Regardless of whether we set the NIC to 100mb/full, it still tried to auto neg and neg at 100mb/half, despite switch set to 100mb/full and not to auto...
View ArticleRe: Windows xp ethernet driver for HP 6000 Pro microtower
Had the same issue. Used Network Adapter Drivers for Windows XP*, Final Release from Intel and it worked just fine.The driver name is PRO2K3XP_32.exe or PRO2K3XP_x64.exe version 18.3 and it's for...
View Article