Re: 800 AIO Front panel buttons
I am also having this issue except that the brightness +/- and the mute microphone buttons works but speaker volume +/- and speaker mute buttons do not. Speaker volume +/- reacts to touch, but speaker...
View ArticleRe: DC5700 Not Boot
The PC doesn't start. It emitsbeepcontinuously and the red LED of the Start Button flashes. Itdoes not even gotoBIOS. If your PC starts, you can see the LEDs of the motherboard to see what it does....
View Article8200 elite Parallel port not run
in myelite8200I can notrunthe LPT porton mywindows764bitportwith the addressbutF0E0wrong with themanagement software fora CNC machine.In thebios(updated)I can onlyedit theIRQof the serial port(itlooks...
View ArticleRe: Compaq evo D310 - Reset / delete BIOS setup password
Hello I have recently bought 4 Compaq evo D310's they wre used in a office and linked as a network, I don't know the passwords and have tried starting them in the safe mode ect, using...
View ArticleClik here to view.
Re: Compaq evo D310 - Reset / delete BIOS setup password
Hi, John: The green password jumper is a little plastic tab-like thing that jumps two pins on the motherboard. You remove that jumper to clear the BIOS password. It is normally located near the...
View ArticleRe: DC7900 SFF latest BIOS 1.26 will crash Win7 error 0xc0000225 "BIOS not...
did you try to reset the bios, press f10 to enter bios, then select apply defaults, press f10 again to save changes.
View ArticleRe: HP XW 9300 turn off 2 seconds after start
I have the same exact problem with a touchsmart 9300 elite.......i hope someone can help, you... which might help me, also???
View Articlewarranty of unopened compaq pr 6000 SFF units
purchasing have ordered some unopened compaq pro 6000s core2 duos units which are out of 3 year warranty on the online checker but from a liabaility point of view i need to understand if any warranty...
View ArticleRe: HP XW 9300 turn off 2 seconds after start
hi, fan is normal, but what is the problem, did windows start or not?
View ArticleRe: Bios up date for dc7600 small form factor
Hi. I would like to update my bios. My computer is dc7600 and I have W7 Home Premium 32-bit. Can I just upgrade it to 1.61? OrMust I do something else?
View ArticleRe: Bios up date for dc7600 small form factor
I upgraded the BIOS to V 1.61 and W7 runs fine on it. Adding RAM helps. A friend with an identical machine is running Windows 8! Says it has very fast boot times. YMMV, of course.
View ArticleRe: RedScreen error windows 7
I was trying to reload an HP 6200 Pro (small form factor) with Windows 7, 64 Bit. I too received the RED SCREEN. I did not expect a problem because it had W7 32 bit previously. After trying...
View ArticleError "Can't find boot device by boot options" when boot from ISO via AMT
Hello.When I try to boot from ISO CD via AMT I got an error message:"Can't find boot device by boot options"Settings are similar to what I made in HP 8100, 8200 etc - SOL/IDER/KVM, network access...
View ArticleRe: Error "Can't find boot device by boot options" when boot from ISO via AMT
try same dvd on a different machine, to see if you get same error.
View ArticleRe: Bios up date for dc7600 small form factor
Did you just upgrade it? I maybe add 2gb RAM. How you upgrade it?
View ArticleRe: Bios up date for dc7600 small form factor
As I recall, I think I used the built-in BIOS flash utility which you access from the BIOS on startup. To upgrade the RAM, just pop in new sticks. If you put equal amounts in the two banks, you can get...
View Articlecomputer won't detect blank cd and won't burn cd
had done a complete restore on my pc almost a year ago and before the restore the computer was able to detect blank cd's and burn cd's now after the restore I noticed it won't detect cd's or burn...
View ArticleRe: computer won't detect blank cd and won't burn cd
Assuming the drive hardware is OK, then the issue is a windows problem. Unfortunatelty you don't mention what version of windows you use and what actions you have actially taken to resolve the problem...
View Article