Re: HP Pro 3500 MT Windows 7 Ethernet Controller Driver
Hi: If you have installed W7, you now need the first driver on the list......
View ArticleRecovery from USB?
I am in the process of migrating from my 2 year old HP Pro 3500 Microtower. I created a USB recovery "disk" a while back, but I have a couple of questions - 1. Can I use the recovery media to...
View ArticleRe: code 43 error
Trying to correct error when setting up IP camera with message Established connection was aborted by the software in your host machine
View ArticleEliteDesk 800 G1 hard drive failure rates
Has anyone else had greater than 5% failure rates on EliteDesk 800 G1 hard drives? We have a rather LARGE amount of drive failures on these devices. We cannot be the only ones... we have over 900 of...
View ArticleRe: EliteDesk 800 G1 hard drive failure rates
Call off the dogs George-p... I wanted to know what others are seeing with this. We already have the proper support steps in play.
View ArticleUDST 800 G1 sending weired UniqueID to DHCP-Server
Hi folks, we got 3 new HP UDST 800 G1. To install all of them I turned on the network boot. We have a software deployment which starts installing them via PXE boot. So heres the problem: After every...
View ArticleUSDT 800 G1 sending weired UniqueID to DHCP-Server
Hi folks, we got 3 new HP USDT 800 G1. To install all of them I turned on the network boot. We have a software deployment which starts installing them via PXE boot. So heres the problem: After every...
View ArticleEliteDesk 800 G1 Display Port Issue
Hi all, I seem to have a recurrent issue when using the Display Port on the ED 800G1. It is connected to a EliteDisplay E221c by a Display port cable. Now several times a day the monitor with black...
View ArticleRecovery discs
I own an HP TouchSmart 300 that runs windows 7. My family is military and during our last move some items were lost. One of those items were my recovery discs. I called HP to order new discs and was...
View ArticleHp Compaq 6005 pro MT Won't power on
I've got a Hp 6005 pro. It won't power it on. I haven't any indication light there is no indication lights at all. First I will do a self test for the power supply to short 2 pinns of. There is on...
View Articlewhich resources it uses?
I am testing an Agilent 82350B board in a HP Compaq Pro 6300 Microtower PC (model code QV983AV) with Windows 8.1 64 Pro. In the device manager, the board is identified with the correct name, but it is...
View ArticleRe: Unable to install NIC driver DC7800p Ultra-Slim
Hi, were you able to resolve the NIC card issue? I've tried downloading from HP and Intel website. I can't get it to work with Win 7 32 bit or 64 bit. please let me know how you solved it. Thanks
View ArticleRe: EliteDesk 800 G1 Display Port Issue
Yes, we have two similar issues with the HP Elitedesk 800G1 SFF. 1) When connected to duel monitors (DVI cables going to HP DVI-Display port adaptor) the workstation will go to sleep, when you try to...
View ArticleProDesk 600 G1 BIOS configuration of TPM via BIOS Configuration Utility
We have a range of HP devices, both desktops and laptops in our environment. Devices are all running Windows 7 64bit and should have Bitlocker enabled, however we have found that a few have not been...
View ArticleRe: ProDesk 600 G1 BIOS configuration of TPM via BIOS Configuration Utility
Sorry - attachment didnt upload. It was just an image of the BIOS screen showing that in the System Security section, the Embedded Security Device (the TPM chip) was showing as Disabled.
View ArticleSata CD Rom power supply melting on HP 8100 Elite
Has anyone had issues with the Sata power cable melting? Please see attached picture
View ArticleBios was updated
As my brother updated the bios,my serial number is missing n even all the values are erased so i want to get those numbers on the board
View ArticleRe: HP compaq Elite 8300 - Touch screen not working with WES 7
WES7 has two flavors, WES7E and WES7P. WES7E does not support touch screen due to license limitation. According to your discription, you are using WES7E.
View Article6300 won't go into 'safe' mode...
My system won't stop & go into 'safe' mode......( F8 ) Does anyone know a trick to make it respond ?? Thanks in advance.....
View Article