Re: Eltebook 2760p tablet heat issues
This is a duplicate, please reply in the following topic:http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-ZBook/Fan-and-heat-issue-2760p-tablet/m-p/6637844
View ArticleRe: D530 SFF won't POST with PCI video card installed
If the PCie slot on your motherboard accepts other cards and the system can POST, then the slot itself is not faulty. If the graphics card allows other systems to POST and works within the OS, then the...
View ArticleWake on LAN HP Compaq 6000 Pro MT PC / Windows 8.1 Pro 64
Hi there!Is there any chance to wake this machine per WOL?And if so, where to make which "switch" in BIOS and in system to use or to change?Many thanks for your kind help!Rgds.,Holger
View ArticleRe: dc7100 CPU upgrade
New post- same problemHaving trouble flashing the 1.10 microcode on a dc7100 that I just upgraded with a P4 670. Been trying to use a 2GB USB drive formatted with HP USB isk Storage Utility/Win98Boot...
View ArticleRe: dc7100 CPU upgrade
Hi: The only way you are going to get the microcode update to work is with a floppy disk drive -- usb or internal. With a blank FDD in the drive, run the microcode update and it will format the disk,...
View ArticleHP Elite 7100 Intel management engine interface Code 10
Hello,the harddisk was failure on my elite 7100. i install a new harddisk and reinstall windows. the first time it was an uknown pci device in the device manager. but after installing the latest...
View ArticleHP Pro3500 no recognize headphone
my hp pro3500 cant recognize headphone on front with speakers on back panel. microphone work on both panel.have newset realtek driver from realtek site. in device manager -> sounds, only Realtek HD...
View Articlemake ssd primary drive in hp prodesk 400 G1 microtower
the ssd is cloned, installed and working.how do I make the sdd my primary drive for booting and acessing all programs all and dataI want to use my HDD purely as backupwhat are the steps? P.S. This...
View ArticleRe: Dc7900 PCI serial port driver (FU036ET)
I have the same problem in Win 7 64-bit, Can you help me with that ?
View ArticleHP DC 5750 SFF wrong CPU ??
i bought amd athlon64 5200+x2 Brisbane and when i start pc it takes 3 short beeps from speakerWhat to do?is this Cpu Wrong?i have the latest bios 2.35
View ArticleRe: make ssd primary drive in hp prodesk 400 G1 microtower
I haven't used a 400 G1 so haven't seen its bios.But you just need to go into bios and change the boot order so that it boots from the SSD first. Although one thing, a 400 G1, isn't a laptop. This is a...
View ArticleUNABLE TO SET PC TO TURN ON AUTOMATICALLY AT A CERTAIN TIME
-06-201403:56 AMHi team HP, Im currently having issue with BIOS POWER ON.I had try set correct time & date at system BIOS, but unit was fail to start. Following is the Troubleshooting that i...
View ArticleCompaq 8100 Elite - Ram problem
10-03-201403:06 AMI bought in 2010 a HP Compaq 8100 Elite Small Form Factor sure of HP professionality.In June I would like to improve the ram with more 8gb. I tried to buy 2 modules of 4gb in the...
View ArticleRe: HP Elite 7100 Intel management engine interface Code 10
Hello,after set the recovery jumper on the board,the device is working. thx
View ArticleHP Elite 7100 flash the bios?
Hello,i flash the newest bios version 6.18 REV. A. on my elite 7100but i use the /X option and the afuwin tool from 5.19 REV.A.without the /X option i get allways the error message wrong id. but now...
View Article6 Long BIOS beeps after video card installation
When the video chip on my HP dc7700 SFF (Windows 7) died, I installed a GeForce 8400 graphic card in the computer. When I turned it on, I got 6 long beeps, so I turned it off and back on and the beeps...
View ArticleMy computer won't open the boot menu
I have an hp compaq d220 that I got used from a friend, and I want to install a different os on it. It currently has Windows XP. When it turns on, it says <press [TAB] to post screen> <F9=Boot...
View ArticleRe: My computer won't open the boot menu
Hi cloveridge Kindly follow below steps : 1. OFF PC2. After power On, press ESC (keyboard)3. insert Installation media (DVD or Pen Drive)4. Press F95 Choose the DVD or Pen Drive. But, if u install...
View Article